Specialized Technical Support
We offer industry-specific technical advice, product analysis reports, and furnace consumption optimization.
GRAPHITE ELECTRODES
High-efficiency conductors manufactured with premium needle coke. Designed to optimize energy release and smelting in electric arc furnaces (EAF) with maximum mechanical strength and low resistivity.
Our Services
Specialized Technical Support
We offer industry-specific technical advice, product analysis reports, and furnace consumption optimization.
B2B Capacity & Logistics
Direct supply with an annual production of 20,000 tons and inland logistics using our own railway hopper cars.
Operational Cost-Efficiency
Uniform structure featuring low consumption rates, high electrical conductivity, and extreme oxidation resistance.
GRAPHITE ELECTRODES
UHP (Ultra High Power)
UHP graphite electrodes engineered to withstand extreme current densities (20-30 A/cm³). Ideal for high-performance steel mills looking to reduce Tap-to-Tap cycle times.
Reference Parameters
Compound
Specification
Typical Range
Resistencia Eléctrica
4.8 - 5.8
µΩ·m
Módulo de Ruptura
10.0 - 14.0
Mpa
Densidad Aparente
1.68 - 1.74
g/cm³
Coeficiente de Expansión (CTE)
1.1 - 1.4
10-6/C
HP (High Power)
HP graphite electrodes offering an excellent balance between cost and conductivity. Optimized for medium-scale smelting operations with currents up to 67,000 A.
Reference Parameters
Compound
Specification
Typical Range
Resistencia Eléctrica
5.8 - 6.6
µΩ·m
Módulo de Ruptura
10.0 - 13.0
Mpa
Densidad Aparente
1.64 - 1.68
g/cm³
Coeficiente de Expansión (CTE)
1.6 - 1.9
10-6/C
RP (Regular Power)
Standard and cost-effective solution for conventional smelting furnaces. Manufactured with high-quality calcined petroleum coke for less aggressive processes.
Reference Parameters
Compound
Specification
Typical Range
Resistencia Eléctrica
7.0 - 10.0
µΩ·m
Módulo de Ruptura
8.0 - 10.0
Mpa
Densidad Aparente
1.53 - 1.56
g/cm³
Coeficiente de Expansión (CTE)
2.2 - 2.6
10-6/C
Safety Recommendations
Logistics Handling & Lifting
Lift the electrode from both ends simultaneously. Never use iron hooks directly on the threads or nipples to prevent irreversible structural damage.
Storage & Weather Protection
Store on wooden pallets in roofed areas. If an electrode gets wet, it must be thermally dried before use to prevent cracking and premature oxidation in the furnace.
Pre-Connection Cleaning
Clean the surface and internal thread exclusively with oil-free and water-free compressed air. The use of wire brushes or steel wool is strictly prohibited.